 |
Stainless steel wire balustrading is a popular and modern type of balustrading that is not only practical and safe but offers clean lines and a professional appearance. At Stallion Stainless we only offer the best quality stainless steel wire balustrading fittings which are why we are proud suppliers of ProRig professional wire balustrading systems. Most wire balustrading fittings can be easily adapted to suit timber or stainless steel posts. Click on the Images Below to View Our Range in More Detail. |
|
 |
 |
|
 |
 |
|
 |
 |
|
 |
 |
|
 |
|
|
| Wire RopeProRig® Wire Rope To ensure complete quality of your wire balustrade system it is highly recommended that ProRig® wire rope is used with your wire ProRig® balustrade system.
3mm 1×19 wire is the least flexible wire and because of this it’s ideal for balustrade wire. You can’t use this wire for hand swaging though as its too rigid.
3mm 7×7 strand wire is semi flexible and is the best choice wire for hand swaging of balustrade wires. 3mm 7×19 strand wire is very flexible and can be used when the wire needs to turn tight corners. |
 |
|
Tools For DIY Installation
We have a variety of tools available for purchase for the use in correct and accurate DIY installation. All you need to do is purchase the wire and fittings.
 |
HS-14CR – Used with Standard DIY System |
 |
WRC-4CR – Cutters can be used with all DIY balustrade systems – cuts up to 4mm |
 |
HX-50 – Used with Nutsert/ Insert Tension Rod Systems |
 |
PL-10 – Used with Nutsert/ Insert Tension Rod Systems |
 |
HN-02 – Used with Nutsert Tension Rod System/ Nutsert swage stud system/ or where nut rivets are required to be inserted in posts. |
